Flake finish · DP-S01–DP-S16
Crystal ceramic plaster
A stone-look decorative coating in which ceramic flakes are held together by an acrylic binder. Suitable for both interiors and facades.
Colour:16 colours · DP-S01–DP-S16
- Acrylic resin with ceramic-based flakes
- Waterproof, washable and non-flammable
- Elastic structure that covers cracks
- For concrete, block, brick, glass, iron and wood surfaces
- 16 colours: DP-S01–DP-S16
Ceramic plaster
A flake-textured, stone-look surface
The flakes in crystal ceramic plaster are made by bringing micronised ceramic powder to a paint-like consistency in the chosen colour and firing it at high temperature. The flakes are then sized, blended in set colour ratios and mixed with an acrylic binder into a mortar that is applied to the wall.
The result is a stone-look surface in natural granite colours. It bonds firmly to the substrate, and its flexible structure covers any cracks that may form. It stands up well to knocks and can be repaired when needed.
Thanks to these properties, it is used not only on facades but also in stairwells and interiors.
Key features
Waterproof
A surface that stands up to rain and the elements.
Washable
Can simply be washed when it gets dirty.
Covers cracks
Its elastic structure covers cracks in the surface.
Impact-resistant
Resists knocks and can be repaired when needed.
Interior and exterior
Facades, stairwells and interiors.
Suits many surfaces
Concrete, block, brick, glass, iron and wood.
Preparation and application
Do not apply when the air temperature is below 5 °C.
- 01
Prepare the surface
Repair any damaged areas. Prime the surface with an acrylic primer in the colour of the plaster and allow the primer 24 hours to dry.
- 02
Prepare the mixing water
Pour clean water into a large plastic container, add the powder additive from the pack and mix quickly.
- 03
Add the flakes
Pour the ceramic flakes into the mixture and wet them thoroughly. Add the binder gradually until you reach a mortar consistency; if it is too thick, thin it with a little water, then leave it to rest for about half an hour.
- 04
Apply
Spread the mortar onto the surface with a plastic or steel trowel.
Before you order
Before ordering, ask us how many square metres one pack covers and what it contains. We will work out the quantity your project needs together.
About crystal ceramic plaster
What is the difference between crystal ceramic plaster and shell plaster?
Both are acrylic-bound, ceramic-based decorative plasters. Crystal ceramic plaster comes in 16 colours (DP-S01–DP-S16) and can be ordered on depkamarket.com. Shell plaster is sold as a 20 kg set covering 18–20 m², with the DP 501–DP 548 colour chart; contact us for its price. We can help you choose the right one for your project.
Where can it be used?
On facades, in stairwells and in interiors. It can be applied to concrete, block, brick, glass, iron and wood.
Do I need a primer?
Yes. Before application, prime the surface with an acrylic primer in the colour of the plaster and allow 24 hours for it to dry.
How much does it cost?
Crystal ceramic plaster costs 2,400 TL. This is the price in Türkiye; for export orders, please contact us. You can order on depkamarket.com or via our WhatsApp line (+90 532 059 87 83).
